Buckleys: Calibration kit for the BathyCorrometer® Pro’

The Calibration Kit has been created to provide all the necessary components to enable customers to verify the accuracy of the readings on the Buckleys BathyCorrometers so that ‘in-house’ calibration certificates can be issued.

The process requires two areas to be checked. The electronics should be tested using the BCM Checker. Readings on the BathyCorrometer® should be 0.000 with the CalChecker switched off and 1.990 with it switched on.

Providing the readings are correct, the silver/silver chloride screw-in half cell should be checked by using K-SAT reference cells in a standard salt water solution. To confirm the readings, three cells should be used and the sea water corrosion test mixture should be made up to a 3% solution. Kit comprises:

• CalChecker Pro’
• 3 x screw-on K-SAT reference electrode cells
• Sea water corrosion test mixture
• Full instructions for ‘in-house’ verification